Ship Machinery Winch
Our hydraulic winches have been widely used in ship and deck machinery. This ship machinery winch satisfies the demanding working conditions on ship. Its highly reliable and efficient performance has been approved by both our domestic and international customers.
Mechanical Configuration: The winch consists of valve blocks, hydraulic motor, Z type brake, KC type or GC type planetary gear box, drum, frame, brake, protection board and automatically arranging wire mechanism. Customized modifications for your best interests are available at any moment.
The Ship Machinery Winch’s Main Parameters:
| The 4th Layer |
Low-speed |
High-speed |
| Rated Pull(KN) |
50 (Ø35 wire) |
32 (Ø35 wire) |
| Rated Speed of Wire (m/s) |
1.5 (Ø35 wire) |
2.3 (Ø35 wire) |
| Rated Speed of Drum (rpm) |
19 |
29 |
| Layer |
8 |
|
| Drum Size: bottom radius x Protection Board x Width (mm) |
Ø1260 x Ø1960 x 1872 |
|
| Wire Length (m) |
Ø18 x 2000, Ø28 x 350, Ø35 x 2000, Ø45 x 160 |
|
| Wire Diameter (mm) |
18, 28, 35, 45 |
|
| Reducer Type (with motor and brake) |
IGT80T3-B76.7-IM171.6/111 |
|
| Hydraulic Motor for Wire Arrangement Device |
INM05-90D31 |
|
| Wire Arrangement Device | Angle Self-feedback Adaptive Wire Arrangement | |
| Clutch |
Non |
|
| Working Pressure Difference (MPa) |
24 |
|
| Oil Flow (L/min) |
278 |
|
| Toal Transmission Ratio |
76.7 |
|